ESPALTHERMAHeat pump reports
When you confirm your heat pump model with Help others get their heat pump recognised ticked, ESPAltherma sends one report here, and one again after each firmware update, which shows the versions in use. It lets ESPAltherma recognise the next heat pump of the same model without asking its owner. From 2.0.0-beta.27 the same box also sends a short daily heartbeat: the firmware version, the board, the model in use, the hydro board software, how long the board has been up and which optional features it runs (targets, power limit, unit meter, HT reader, statistics) and whether they work. No readings, no settings.
What a report contains
- The model you confirmed, and the registries ESPAltherma had to correct on your unit.
- The identification codes of your heat pump: the board numbers of the indoor and outdoor units, their software version and capacity.
- The replies of the heat pump registries, read once during the detection. They include the readings of that moment (temperatures, pressures...).
- The ESPAltherma version and the type of board.
- A random installation ID, so that a board sending again replaces its report instead of adding one.
What a heartbeat contains
- The same installation ID, the firmware version, the board, the model in use and the hydro board's software and name plate model when the board holds them.
- The time since the board started, and for each optional feature (hot water and leaving water targets, power limit, the unit's meter, the HT reader, the statistics) whether it is off, ready, unsupported on that unit or without an answer.
- Once a day, one row per board and day; a board sending twice the same day replaces its row.
The site also records the country and city the report comes from, as Cloudflare (which hosts it) locates the connection. It shows in which regions each model is installed.
The web interface shows the exact report before anything is sent: See exactly what is sent, next to the checkbox.
What is not sent
Your Wi-Fi and network settings, the MQTT broker and its login, passwords, your name, e-mail address or location. The IP address of the connection is not stored: only its country and city, and the day of each report.
How reports are used
The heartbeats show how many boards run each firmware version and which features are used and work on which hydro board software: that is what decides where the work goes next.
The identification keys of confirmed models are added, with the model name only, to the list of known heat pumps of ESPAltherma (data/fingerprints.json on GitHub). Reports also show where a definition file does not match real units.
Changing your mind
Untick the box in the web interface: nothing more is sent. To remove a report already sent, open an issue with the installation ID shown in the report.